Items in bag

WOW0821240209BLCLJLLLML

  • Free shippingOn all prepaid orders

  • 10 dayreturns

  • COD available all for Orders Under Rs. 3000

  • India's largest selectionof Beauty Products

  • Moen Sma1015 Ch Securemount Anchors, Chrome, Stainless
  • Moen Sma1015 Ch Securemount Anchors, Chrome, Stainless
  • Moen Sma1015 Ch Securemount Anchors, Chrome, Stainless
  • Moen Sma1015 Ch Securemount Anchors, Chrome, Stainless

Moen

Moen Sma1015 Ch Securemount Anchors, Chrome, Stainless

Moen

Moen Sma1015 Ch Securemount Anchors, Chrome, Stainless

SG$ 124.00 SG$ 76.00 Save: (38.71%)
SG$ 76.00 SG$ 124.00 Save SG$ 48.00 (38.71%)
Delivery Time: 12-18 days

Quantity:

Delivery Time: 12-18 days

Import Duties to be borne by the customer at the time of delivery.
Product price is exclusive of such duties.

4 Great Reasons To Buy From Us:

  • Tracked Shipping on all orders

  • 100% Original
    Products

  • Secure Payments

  • 14 Days Returns

  • Tracked Shipping on all orders

  • 100% Original
    Products

  • Secure Payments

  • 14 Days Returns

Product Description Product Description
  • Mirror-like chrome finish coordinates with almost all Moen Home Care products
  • SecureMount design for easy, secure installation that supports up to 300 lbs.
  • Installation diameter of 3.17"
  • stainless finish coordinates with today's popular kitchen appliances and accessories
  • Backed by Moen's Limited Lifetime Warranty
  • Used for replacement of SecureMount wall anchor for Moen Home Care Safety Grab Bars
Read More
Read Less
Reviews See all reviews

Customer Reviews

Parts Ordered As Stainless Steel furnished as Chrome -- Corrode in Damp EnvironmentThe design is well-done and impressive! However, the Anchor Riing is supplied in Chrome, not the advertised Stainless Steel. Although Amazon confirmed that my order was for stainless steel and provided me with a free return, the replacement pair were also chrome.These were for a bathroom installation next to a shower . . . and chrome DOES corrode with humidity!Amazon to give credit and will check inventory and labeling. 2Actually workedI had not tried these before but the studs were just not in the right place. These require a 1.25 inch hole and Amazon has a carbide drill that worked great on tile, B000BO8MG4. Drilling the hole is the only hard part, the mount goes in easily. You need 3.5 inches of air space in the wall to maneuver it so it won't work on block walls but tapcons work on those. These anchors only have a little side to side adjustment so measure carefully. The mount is completely covered by the flange so color isn't critical but I used these stainless mounts with my stainless shower bars and they worked fine. 5My Install. Best Alternative I've Found.I had to use 3 of these with an "L" shaped grab bar. The shower stall was a fiberglass insert, & due to the molded shelves and design of the walls, it stood out away from the studs. In order to not deform the shower walls, I had to use either this product or toggle bolts. The reason I chose this product was because of the ADA specifications.THE INSTALL:You must accurately mark where the grab bar is going to be placed. I held it in place with a level on top of it. Then traced around the mounting plates. Go ahead & mark where the screw holes are too at this time. Next, find the exact center of the mounting plate circle you traced onto the wall. Drill your hole with the appropriate bit. My project was fiberglass, so my holes were easier & faster than tile. Next, insert the wall mount. The instructions provided with the mount are sufficient. Not great, but definitely should be read completely before pushing anything into the wall. When putting the mounting plate against the wall, use the marks you previously made to know precisely where your grab bar mounting holes were. Then tighten up the mount on the wall. Test fit the grab bar. Hopefully, everything lines up perfectly. But if not, you're not completely screwed yet. Loosen the center scew holding the plate in place. You'll find there is just a little wiggle room in each mount. If you've carefully measured, marked, & drilled the holes; then there should be enough wiggle room to complete the install. Tighten the plates in place. Mount the grab bar. Snap the screw covers over the plates. & your done!OBSERVATIONSFirst off, in full disclosure; I own/run a handyman business. So, I am very familiar with hand tools & construction.I do wish the mounting plate was stainless vs aluminum.Everything was a very snug fit. Measurements need to be exact.I cannot say as to the longevity of these brackets yet.It did provide a very sturdy hand hold on the fiberglass wall. Partly because of the bracket design, & partly because I went with an "L" shaped bar.Studs are always best. But this is a good alternative when studs can't be used.I have a similiar install on a tile shower next week. If I come across anything worth noting, I'll update this review.UPDATE: So... on the tile wall install. The wall ended up being more than 4 inches thick. No way to have known that before cutting the 1 1/4" hole. Tile + 1" of thinset + metal lathe + 1/2" of thinset + concrete backer board + drywall + plywood + 2x6 attatched to studs before getting to hollow part of wall. Slight overkill on the initial build! My fix to this was to use 1/4" x 4 1/4" lag bolts & a flat washer. The lag bolt fit the center hole on the metal base with the 3 screw holes. & even with the flat washer there was clearance to attatch the grab bar. The lag bolt is holding the base plate to the 2x6, & the base plate is holding the grab bar. I used some sealant around the base plate to make sure water didn't make it into the wall. I didn't use the inner wall toggle part or the supplied screw for it. So far customer has used it many times & has had no complaints. Hope this helps someone else out of a "routine" install. The only thing I would have done different is stop drilling the 1 1/4" hole as soon as I see that I've passed the max depth for the inner wall insert. I should have just drilled the pilot hole for the lag bolt at that point. I used a diamond tipped hole bit & a squeeze bottle with water to keep it cool & flushed. Took about 10 minutes to get through the tile & thinset on each hole. Didn't need a template to hold my bit steady to get it started in the correct place. I found a bit @ Lowes with an arbor with a centering pilot bit for tile. Worked great. 4DangerousAfter four years, my grab bar came away in my hand with a shower of grit and particles, because the aluminum disk had corroded to nothing. Aluminum is a reactive metal and its disintegration in wet conditions is normal. The disk should be made of stainless steel. It would cost more, but it would do the job. 2Looks great, but....what they don't tell you is the trim ring on the grab bar DOES NOT cover the mounting plate. A great idea poorly executed. I expect better from Men. 1Great Solution - Use Care During InstallGreat solution for installation without needing wall studs. Installed bar is very secure.One comment to other reviewers is that, in my case (vertical installation), I needed a pair. You can't always get by with one.Only comments noted during installation are that screw mounts for hand rail are close tolerance. Use care during install. 4A must for mounting Moen hardware securely to sheet rock.If you're installing a Moen grab bar and don't have a stud or studs where you need to attach it to the wall, this "Secure Mount" hardware is a must! This is a solution when you have only one stud to mount to.This is really needed if you're mounting the bar to sheet rock. It makes the job easy and the bar securely installed. WARNING: Thewall you're mounting the bar to cannot be constructed of less than full 2 x 4 studs (4 is actually 3 1/2") A thinner wall made with "budget" 2 x 4's will keep the plastic Secure Mount Anchor from being rotated and pulled into full contact with the back surface of the sheet rock, and you're never going to get aa good, solid mounting of the bar. It can possibly be done if you touch the other side of the wall with the black plastic Guide Sleeve, but it ain't easy. 5alignment must be perfect. The outer end cover dose not fit completely ...OK. Worked well on one side, not the other. Finding the right spot for the anchor was difficult. If there is any wood inside the wall, it will be in the way. Also, alignment must be perfect. The outer end cover dose not fit completely flush, because there is no lip edge, as there is in the stock screw down plate. In the end, I was just happy to be able to complete the installation. It works. 3Great system for Moen Grab barsThese appear to working as advertised for my elderly parents. They were easy to install and seem very sturdy, they mount right up with the Moen grab bars.They fit a wide range of dry wall thicknesses. I would check your local big box home center to compare the prices of these mounts, I found them to be cheaper after I had already ordered. I plan to use these mounts and Moen bars in the very near future for additional supports in my parents bathroom. 5Try not to buyDifficult to install and it's better to attach grabber bar to studs if possible. Too expensive and you only have one try to not make mistakes. Maybe if one has experience installing this item, it would help but for almost $16 each experience is valuable. Good idea but technique is hard to send in an instruction. 2
See All Reviews
Delivery Delivery
  • Shipment tracking ID will be provided after your product(s) is dispatched.
  • The delivery date stated is indicative and subject to availability, payment authorization, verification, and processing.
  • In case your product(s) is not delivered due to an incorrect or invalid address, we will not be able to process any claims. However, we will notify you if it is returned to us.
Returns Return
  • Return or exchange requests can be made within 14 days of the delivery date.
  • To return or exchange any items, please email us at info@ninelife.sg, clearly mentioning your order number and our customer support team will guide you on the process.
  • To be eligible for return, products must be in the exact condition you received them in. All packaging material must be undamaged and unused with the price tags intact.
  • Orders can be cancelled before dispatch. If the order has already been dispatched, cancellation fees might be charged.
  • Due to the nature of the products that we sell, we will not be able to replace or refund unwanted items if they have been opened or any seals are broken.
  • The refund will not include the import duties or the cost of delivery or return postage.
  • If your refund is approved, then it will automatically be credited to the original method of payment, within 7-10 days.
  • NineLife reserves the right to alter and enforce this Return and Refund Policy at any time without having to serve a prior notice to users.

Recently Viewed

Back to Top